Semi-Automatic ROTARY Bottle WASHING Machine: MODEL: AB-RBW:
Technical Specification
|
Model |
ABRBW-64 |
ABRBW-96 |
|
|
Output (@100 ml Glass Round Bottle) * |
50-60 BPM |
80-90 BPM |
|
|
No. of Container Holders |
64 (32 x 2 Rows) |
96 (32 x 3 Rows) |
|
|
Direction of Machine* |
Clock Wise |
||
|
Electrical Specifications** |
Main Motor |
0.5 HP / 415 Volts / 50 Hz |
|
|
Pump Two Nos. |
1 HP x 2 = 2 HP / 415 Volts / 50 Hz |
||
|
Electrical Heater |
3 Kw. |
||
|
Tank Capacity |
75 Ltrs. S.S. 304 (2 Nos.) |
||
|
Wash Cycle |
4 Inner+1 Outer |
||
|
(Inner wash sequence is interchangeable) |
|||
|
Working Height |
860+/- 50 mm |
||
|
Change part required |
A) Neck Dia. : Neck Holding Pocket |
||
|
B) Flat Container : Special type of cups |
|||
|
Input Specification |
|||
|
Container Size |
Round*** |
30 mm Dia to 100 mm Dia |
30 mm Dia to 80 mm Dia |
|
Respective Height: 50 mm to 270 mm |
|||
|
Neck Dia: 20 mm to 28 mm |
|||
|
Flat/Square*** |
Length: 30 mm to 100 mm |
Length: 30 mm to 80 mm |
|
|
Width: 10 mm to 50 mm |
|||
|
Height: 58 mm to 190 mm |
|||
|
Consumption of Water |
|||
|
First Wash |
200 Liters / Hr. |
230 Liters /Hr. |
|
|
Second Wash |
No consumption as such, water loss during re-circulation shall be compensated |
||
|
Third Wash |
200 Liters / Hr. |
230 Liters /Hr. |
|
|
Fourth Wash |
No consumption as such, water loss during re-circulation shall be compensated OR Air Wash |
||
|
Outside Wash |
200 Liters / Hr. |
230 Liters /Hr. |
|
|
Utility Requirement |
|||
|
Electric Supply |
3 Phase + Neutral + Earthing |
||
|
Electric Load |
2 KW + 3 KW for heater |
||
|
Air Consumption |
6 bar pressure 5 CFM |
||
* Depends on bottle size & operator speed.
** We can supply as per customer requirements.
*** With help of change parts.
Salient Features
- Geneva Mechanism.
- Four inner (Included one air wash) & one outer.
- Sequence of washes to customer’s choice.
- Easy operation.
- Stationary nozzles eliminate contamination of water cycles.
- Easy loading and unloading.
- Individual solenoid valve for each washing sequence, that eliminates carbon plate and other accessories reduce leakage and maintenance to minimum.
- Higher capacity centrifugal pumps to wash bigger bottles (500 & 1000 ml.).
- The stationary nozzles avoid chipping of bottle necks.
- Pumps and tanks are mounted on portable stand for easy maintenance.
- Bottle guide system especially for lightweight bottle.
- Pumps and Tanks are mounted on Portable stand for Easy Maintenance.
- Separate panel control to avoid any short circuit due to spraying of water.
- S. glycerine fill pressure meter.